Tagrende ..

 

Tagrende/tag er fra fabrik fuget med en type kit. Det er som regel udtørret og stenhårdt med sprækker til følge.

Forslagsvis renser du det omhyggeligt af og sandblæser hvis der er spor af rust (selv California biler kan være rustne i tagrenden på grund af dette problem).

Tagrendesamlingen kan med fordel grundes med pensel. Brug en tynd zinkholdig primer som kan komme ind i alle sprækker.

Tal med din autolakerer om hvilket tætningsprodukt han vil lakere på. Bruger du et kvalitetsprodukt fra 3M eller Teroson så går du normalt ikke galt i byen.

Brug Teroson 9120 til synlige samlinger der skal overlakeres.

Mustang How To

How to Remove Mustang Drip Rail Moldings

Removing a classic Mustang drip rail molding can be a mind bending experience if you’ve never attempted it. Read this article to see how easy it really is.

Random_01 043Tools of the Trade

The tools required are quite simple; a rubber hammer and a block of wood for those attempting to remove and reuse the existing molding or a bottle cap remover for those of you that just want them off in a hurry.

 

 

Random_01 044The salvage approach

If you have some patients and a delicate hand you may be able to remove you molding without damaging them by using a rubber hammer and a block of wood.

Place the block of wood against the inside edge of the molding and give it a tap or two until it releases from the drip rail. Continue this procedure a few inches at a time and hopefully you will have a reusable piece.

The Progressive ApproachRandom_01 045

This is by far the easiest way to get a drip rail molding off. Use a bottle cap remover; its the same motion as removing a cap from a cold beer. Repeat the cap removal technique every couple inches and the molding will be off in no time and probably destroyed.

 

 Posted by at 18:35